Upcycling for Kids: Tie-dyed Muslin Squares

During the course of the Queen of Konmari challenge, I’ve realised that I have accumulated a sizeable stack of muslin squares which I am no longer using since Thumper has outgrown them.

These muslin swaddles were one of my best baby gear investments and they have lasted through three kids and have been washed multiple times and are still in fantastic condition. They are too old to be given away (I mean, who wants used muslin nappy cloths, really), so I decided to see if we could give them a new lease of life as multipurpose kitchen cloths or dishtowels!

I decided to see if we could dye the muslin cotton squares, to make them prettier to look at. I roped the kids in to help me, and I think the final product turned out rather nice!

How to Make Tie-Dyed Muslin Squares


  1. Plain cotton muslin squares, washed
  2. Fabric dyes (I got mine from Spotlight)
  3. Rubber bands
  4. Plastic forks
  5. Water
  6. Optional: Plastic ziplock bag


  1. Wet the entire cloth in plain water and wring all of the water out so that the cloth is damp but not sopping wet. This will make the dye soak through evenly later on.
  2. Spread out the cloth flat and place the fork in the centre of the fabric (or any random part of the cloth, depending on where you want the centre of the swirl to be)
  3. Twist the fork round so that the cloth wraps itself around the fork tightly.
  4. Secure the swirled up cloth tightly with several rubber bands. I used four rubber bands to divide up the cloth into 8 equal triangle shaped sections
  5. Using the fabric dye, fill up one of the triangle sections on one side, then flip the cloth over and fill up the same section on the other side.
  6. You can choose contrasting colours for the other sections, use the same colour or leave them white. Try not to colour two adjacent sections the same colour – leave some white gaps or the swirls will not be so obvious.
  7. (Optional step) Place each cloth in a separate ziplock bag
  8. Put the cloths aside and leave them to ‘set’ overnight. I let them set for 24 hours.
  9. Remove the rubber bands from the cloth and rinse each cloth separately in cold water a few times, squeezing out the excess dye until the water runs more or less clear (or until you get bored. Whichever happens first).
  10. Wash cloths as per washing instructions in your washing machine with an extra rinse, making sure to separate them from the rest of your laundry for the first wash, in case the colour runs!
  11. Ta-dahhh! Enjoy your new and beautiful cotton multipurpose cloths!

P.S. This turned out to be such a simple and fun craft, that I suggested it to the Aged P who was throwing a baby shower for one of her friends! The Aged P got together with the mom-to-be and her friends to make these gorgeous and unique tie-dyed muslin swaddles for the new baby in a variety of patterns and colour ways. I think tie-dye teeshirts would make a fun kid’s party activity too.


Upcycling for Kids (Using Teeshirts) Part 4: No-Sew Braided Rug

Perhaps you have got a few Teeshirts that are very worn out and not even worth giving away. You could rip them up and use them as cleaning rags, or you can try extending their usefulness by braiding them into a nifty rug, old-school style!

I actually tried making a similar rug earlier this year using old towels, but sewing the towel braid together hurt my fingers – and the rug didn’t hold together as well as I liked.

Using old teeshirts for this braided rug worked better for me, because the braid was easier to work with, and I could weave the rug together – no fussing about with needles and other pointy hurty things. This craft turned out to be straightforward enough for Little E to do it on her own! We ended up with a lovely, soft rug which made a great bathmat – and it’s washable too.

In this tutorial, I use a four strand braided technique (like a ‘fishtail’ braid), because I feel this gives a wider and flatter weave, but you can use a three stranded braid if you feel that a puffier rug works for you.

How to make an Old-School Braided Rug from Old Teeshirts


  1. Old Teeshirts (I used about 3 large men’s tees to make a round floormatbut you can use more if you want a bigger rug)
  2. Scissors



  1. Cut the tees into 1.5-2 inch strips widthwise so that you end up with a bunch of loops
  2. Stretch the loops as far as they will go until the fabric rolls in on itself
  3. Cut the loops open on one end so that you are left with long strings
  4. Choose 4 strings and knot them together. I decided to go with 2 strings of contrasting colours to get a nice chevron pattern.fishtail-braid-four-strand-rug-tee-shirt
  5. Cross the outer (green in the picture above) strings over each other, right string over the left to form an X.
  6. Take the next set of outer strings (dark blue in the picture above). Cross them over the centre of the braid, right over left, to form a second X.
  7. Take the following set of outer strings (green) and cross them in the centre again, right string over left, to form a third X. You are now back to your original position, having done three layers of braiding!
  8. After you have done about 4-5 inches of braid, roll the braid into a spiral, with the original knot in the spiral centre. Now you can weave the free braid together to form the rug.
  9. Take the string that is closest to the centre of the spiral and pass it through one of the loops of braid that it is nearest to it (see the picture below).
  10. Pull the string tight to secure the free section to the rest of the rug.
  11. Continue to braid, securing each section every 1.5-2 inches.braided-teeshirt-rug-upcycle-recycle
  12. When the lengths of string become too short to braid, you can add another string to it by knotting the ends together. To make a less bulky knot, snip a small hole about 0.5 inches from the end of both strings that you wish to join together.
  13. Pass the end of the old string through the hole in the new string.
  14. Then, push the other end of the new string through the hole in the old string
  15. Pull tight and it should form a small, tight knot!
  16. Continue braiding your rug until it reaches a size that you are happy with
  17. To finish off the rug, knot the ends of the free braid to one of the loops from the braid next to it, securing the end of the braid to the rest of the rug. You can then trim off any excess string or tuck the strings into the rest of the rug to make them neat.
  18. Enjoy your soft new floormat!


    Left: Eleanor braiding using two sets of contrasting colours to form chevrons, Right: Another rug that we made using four different colours

Upcycling for Kids (Using Teeshirts) Part 3: No-Sew Multilayered Necklace

Here’s a super quick and very simple no-sew tutorial to turn an old teeshirt into a pretty cute multilayered necklace or infinity scarf – and it’s an easy one to do with the kids too!


  1. Old Teeshirt (a seamless tee is best)
  2. Scissors


  1. Lay Teeshirt flat
  2. Cut off the bottom hem of the teeshirt and put it aside.
  3. Cut your teeshirt into 1-2 inch strips across the width of the tee. I used 2 inch strips because it was easier for Little E to manage, but I think the necklace will probably look nicer with thinner 1 inch strips. You should end up with a bunch of loops.
  4. Stretch out each loop as far as they will go until the fabric rolls inward.teeshirt-necklace-kids-craft-upcycle-recycle
  5. Join all the the loops together, doubling them up if necessary to create that multilayered effect. Make sure that you can still pull the loops over your head easily. I used three loops doubled up to make a necklace for Little E but you can use more to make more complex-looking necklace.
  6. Cut the bottom hem of shirt that you saved in half to make a long flat ribbon at least 10 inches long.
  7. Using this ribbon, tie a knot around the necklace loops to hold them in place.
  8. Wrap the rest of the ribbon tightly around the loops a few times. I made the wrapped portion a few inches wide.
  9. Tie off the ends of the ribbon with a knot.
  10. Trim the ends to look like a little bow or tuck them under the rest of the ribbon to hide it.
  11. Enjoy your new necklace!


If you are particularly handy, you can experiment with braiding or knotting the teeshirt strands together, or mixing loops of different colours and textures!

P.S. Check out our other Teeshirt Upcycling posts here.

Upcycling For Kids (Using Teeshirts) Part 2: No-Sew Tasselled Tunic

As I said in my previous Upcycling For Kids post, Singapore generates an embarrassing amount of textile waste, which is why I am trying to think of ways to give old clothes a new lease of life instead of discarding them.

Whilst clearing out my wardrobe, I found a few teeshirts that have pretty cute designs on them but really do not suit me anymore. These shirts, although beloved, weren’t really fancy enough to be worth putting aside for Little E for the future. So I decided to repurpose them into cute outfits for Little E to wear right now!

Due to the fact I have the Midas Touch when it comes to sewing machines (i.e. I turn them into blocks of inert metal), this will be a no-sew tutorial.

How to Upcycle Old Teeshirts into a No-Sew Tasselled Tunic (2 versions)


  1. Old Teeshirt
  2. Tunic Top That Already Fits
  3. Scissors

Cutting around the teeshirt to make it the correct size


  1. Lay Old Teeshirt flat
  2. Place Tunic Top That Already Fits on top of teeshirt to act as a guide
  3. Cut the teeshirt into 1 inch strips all around the sides, bottom and sleeves), leaving a 1 – 2 inch border around the Tunic Top That Already Fits (depending on how tight you want the final result to be)
  4. Trim off the tassels on the sleeves, leaving just one pair of tassels in the centre, which you can tie off with a knot. This makes cute, new fluttery sleeves for your new garment!


    Knotting the sleeves, sides and bottom of the teeshirt

  5. Cut the side seams of the teeshirt, then stretch the tassels as long as they will go, until the fabric rolls in on itself. If you don’t use a seamless teeshirt, cut off the seams entirely for a nicer look
  6. On the sides of the teeshirt, tie each pair of tassels (one front and one back) tightly together with a knot, to make a row of knots and tassels down each side of the tunic top.
  7. For the bottom of the teeshirt, stretch the tassels until the fabric rolls in on itself, then knot each pair of tassels (side by side) tightly together. When you are done, you should have created a hem of knots around the bottom of your tunic.
  8. Then, create a second row of knots by tying pairs of knots together. Don’t worry about the tassels looking uneven – you can trim them to equal lengths once you are done. I left our uneven because I thought it looked nicer that way.
  9. Your new and improved tunic is ready to wear!


    Little E wearing the No-Sew Tasseled Tunic (With Sleeves)

  10. If you think that the neckline and sleeves of the Tasseled Tunic are too big (especially if you’re trying to make it fit a tiny tot), you can turn the whole thing into a sassy sleeveless number. Cut the sleeves off at the seams and at the tops of the shoulders, then tie them off with a knot.
  11. Wear your new Tasseled Tunic with pride!

Little E wearing the No-Sew Tasseled Tunic (Without Sleeves)

P.S. Check out my No-Sew Hobo Bag Tutorial here.

Upcycling For Kids (using Teeshirts) Part 1: No-Sew Hobo Bag

In the last 6 months, whilst I’ve been ruthlessly downsizing my wardrobe, I’ve become ever more aware of the amount of waste there is just from the amount of clothes I’ve had to remove from my house (more on this in another post).

I was appalled to find out that in Singapore, we generate over 156,700 tonnes of textile and leather waste in a single year. This means that in Singapore, we generate THREE tonnes of textile waste every 5 minutes! And less than 8% of that is recycled. Yikes!!!

Upcycling is a great way to breathe new life into old clothes, and if you are anything like me and cause all sewing machines within a 100m to malfunction, here is a great No-Sew tutorial that is so simple, even a kid could do it!

How to Upcycle Old Teeshirts into a Cute No-Sew Hobo Bag


  1. Old Tee-shirt
  2. Scissors



  1. Using the scissors, cut off the sleeves of the teeshirt.
  2. Then, holding the shirt together, cut off the collar of the teeshirt to make the opening of the bag. A nice oval shape will do.
  3. Decide how deep you want the bag to be. I used a large square book as a guide.
  4. Cut the bottom of the teeshirt into strips about 1 inch wide to make a row of tassels. (Pro-tip: I left the book on the teeshirt and just cut the teeshirt up to the bottom of the book.)
  5. Make sure you also cut the side seam of the teeshirt. tee-shirt-hobo-bag-upcycle-recycle
  6. Turn the shirt inside out.
  7. Stretch the tassels as far as they will go. This will make them long and thin and easier to work with.
  8. Knot each pair of tassels (one tassel from the front and one from the back of the tee-shirt) tightly together. The shirt will begin to bunch up at the bottom, and you’ll have a row of knots with two strands hanging out of each knot.
  9. (Optional Step) Take any strand from the first knot and tie it tightly to any strand from the second knot in the row. Then from the second knot, take the remaining strand and tie it to any strand from the third knot in the row. Continue down the row, tying all the knots together. This will close up the gaps between the knots and make the base of your bag more secure.hobo-bag-tee-shirt-tshirt-recycle-kid
  10. Now turn the bag inside out so that the shirt logo and patterns are showing and all the knots and tassels are on the inside. You should have two straps at the top of your bag.
  11. Cut the two straps in half where the shoulder seam is, knotting them at the top to create the shoulder strap for the hobo bag.
  12. Enjoy!

Optional ideas:

  1. If you like the look of the tassels, leave them outside the bag for a cute boho look.
  2. You can leave the two straps at the top alone if you prefer a simple tote bag.
  3. You can cut each strap at the top into three strips and braid them together to make a braided shoulder strap.

3 quick and easy Chinese New Year Crafts

Looking for ways to keep the kids occupied during Chinese New Year visitation?

Why not set out some simple crafts that will keep them busy and stop them from raiding the joint and scoffing all pineapple tarts!

These quick and easy crafts are all easily made from materials found around the house during Chinese New Year, so they are just perfect for a last minute kid’s craft – especially if you don’t have any little ones but are expecting visitors who do!

1. Make some goldfish! 

Fish are a symbol of prosperity in chinese households, as the word for fish, ‘yu’, sounds exactly like the word for ‘abundance’. Goldfish are especially prized for their bright red or golden colours, and of course, their name in chinese sounds exactly like ‘an abundance of gold’.


  • Small plastic bottle or cardboard toilet roll – I used a Yakult bottle and a Yoghurt bottle for this.
  • Red plastic bag of the wet market variety
  • Tape – I used double-sided tape and masking tape but any form of sticky tape will do.
  • Marker
  • Scissors
  • (Optional)Leftover paper/card/angpows



  1. First, cut the plastic bag in half and tape one side of it to the plastic bottle or toilet roll.
  2. Roll the bag tightly around the bottle or toilet roll so that it is completely covered.
  3. Fix the bag in place using more tape. Then, stuff one end of the plastic bag into the open hole of the bottle or toilet roll. This will be the mouth of the goldfish.
  4. Add accents or embellishments using a marker or paper. You can use torn or cut pieces of angpow or paper to form fins and eyes.
  5. Cut a strip of plastic bag and tie it tightly around the bottom of the bottle or toilet roll. This forms the goldfish tail. You can make the goldfish tail appear fuller by cutting it into strips.

(Optional) If the bottle you use has a narrow neck, you can tie another strip of plastic bag around the narrowed area to make the goldfish head more obvious.



2. Make a festive lantern bunting!

Most households will have these hung up as decorations during the Chinese New Year period. The bold red paper lanterns, with gold words or designs painting on them, are symbolic of a wish for a bright future.

So shiny!

So shiny!


  • Paper
  • Used Angpows – try to choose angpows with glittery gold designs on them
  • Glue
  • (Optional) Red markers/paint/colour pencils


  1. You can draw a picture of a lantern on a piece of paper, or use this Chinese Lantern Colouring Page as a template (just click to download the file)
  2. (Optional) Colour the lantern red – we used red tempera paint for this
  3. Tear up the angpows and glue them onto the lantern. If you have already painted the lantern red, you do not have to use so many angpow pieces!
  4. (Optional) We just made one and hung it from a length of yarn, but you can make several of these and string them up to make a festive bunting!

3. Make a decorative Chinese New Year banner!

Scrolls and banners with good luck messages are hung up around the household during Chinese New Year, which creates a colourful atmosphere. For our banner, we made a painting of plum blossoms along with the symbol of spring.

Spring into the new year!

Spring into the new year!


  • Black and red markers or paint
  • Newsprint or plain paper cut into a half ring shape
  • Red or brown paper bag cut into a larger half ring shape (we used pink paper)
  • Scissors
  • Tape or glue


  1. Using the black markers or paint, draw a few long lines across a piece of newsprint or plain paper – they may crisscross each other. Add extra short lines as branches.
  2. Using red markers or paint, make red blotches randomly across the lines.
  3. Use the Black marker or paint to copy the symbol for ‘spring’
  4. Glue or tape the finished picture to the red or brown paper bag or pink paper.
  5. Use the red marker or paint to outline your painting.
Happy Chinese New Year!

Happy Chinese New Year!

New Year Upcycling – DIY magazine paper bowl

Happy 2014, everyone!

What better way to start off the new year than with a Good Old Fashioned Spring Cleaning! Oh yes, over in our highrise Owls Nest, I have been very busy writing out my list of Things To Do, and the first three on my list are:

  2. Toy Decimation Retirement
  3. Downsize Redeploy the children’s wardrobe

I have a ton of catalogues that come in through the post, and I can never bear to throw away such a stash of colourful papers that are so great for crafting with. However, during the school holidays, we have been so busy, I haven’t found time to properly sort through the huge stash of junk mail that has been slowly accumulating in great drifts over my study table.

Until now, that is.

We decided to take one of the many catalogues and turn it into a useful container for all the little nicknacks that the kids have collected from various Christmas parties.

J, who is 5 years old, pretty much completed this whole project on his own with very little interference from me.

How to make an Upcycled Magazine Paper Bowl


  1. Magazine pages – torn lengthwise into strips about 1 inch wide
  2. Glue – non-toxic PVA white school glue is the best, but I used plain clear school glue for this
  3. Mod Podge or diluted PVA glue (3 parts water, 1 part glue)
  4. Bowl (to be used as a mould – I used a small stainless steel mixing bowl)
  5. Cling film

Start off with a strip of magazine paper. Fold it lengthwise in half, and then into quarters to make nice equal creases in the paper.


Then, fold both sides of the magazine paper in so that they meet in the centre.

Dab a little bit of glue at one end of the folded strip, and fold it in half lengthwise.

Join all the strips together one by one using glue, making sure they overlap by about half an inch or so. It doesn’t need to be neat. Let the glue dry for a little while before starting to coil the whole thing up.


Keep adding strips and coiling it up tightly until you have a big flat coil of about 10 inches wide (or twice the diameter of the bowl you intend to make). This takes a pretty long time to do, so feel free to spread it out over a few days (or be prepared to step in to help). J took about 4 hours spread out over a few days to complete his coil.

Get a bowl and wrap it tightly in clingfilm. This is to protect the bowl from the Mod Podge and make it easy to remove your project from the mould.

Then, jam the magazine paper coil onto the upended bowl, making sure the sides of the coil overlap each other so that there are no gaps.

Using a brush or a sponge, paint a thin layer of Mod Podge (or diluted PVA glue) over the outside of the magazine bowl and let it dry completely. You can brush a second coat of PVA glue over it if you wish.


Remove your completed bowl and carefully peel off the clingfilm.


A very pretty, upcycled paper bowl! The PVA glue dries clear and hard so it will last a long time, but it won’t be water-resistant so you can’t wash it.

upcycled-recycled-magazine-paper-bowlIt looks so lovely and colourful, I might get J to make a few more of these for my dresser table.